Conventional Beam Smoke Detector Optical Beam Smoke Sensor Lpcb Approved

Get reliable and efficient conventional beam smoke detectors and optical beam smoke sensors from our LPCB approved factory. Shop now for peace of mind.
Request a Quote

PRODUCTS DETAILS

Basic Info.

Infrared Sensor Probe Type
Inclination Sensor
Infrared Sensor Installation
Embedded Wall
Combustible Gas Detector Model
No
Model No.
Aw-Bk901
Distance
25-100 M
Power Supply
24V DC
Application
Ware House, Factory etc
Size
206*94*135 mm
Transport Package
Standard Carton Box
Trademark
AW
Origin
China
Production Capacity
500000

Product Description

Asenware LPCB Conventional Optical Beam Smoke Detector 

Conventional Beam Smoke Detector Optical Beam Smoke Sensor Lpcb Approved
Introduction:
The AW-BK901 infrared linear reflex beam smoke detector, being designed for fire prevention in the open area, is a long interval one and used with the fire alarm controller. The detector is made up of the combination unit of the emitter and the receiver as well as the reflecting mirror. The signal issued by the emitter enters into the receiver after reflection by t
he reflector.

1. Unit the emitter and the receiver as one. In that case, it has advantages of easy and convenient installation as well as wonderful collimation for the optical path.
2. Automatic calibration to make sure one person can debug the device easily.
3. Self-testing function of to monitor the internal fault of the detector.
4. Automatic compensation for the factors of t h e receiving signals to avoid the influence of dust pollution, positional deviation and aging of transmitter tubes.
5. The detector is designed for optical path, strong antijamming capability, seal design and reliable anti-corrosion and water-proof.

Power supply voltage 16V~28VDC
Debug current ≤20mA
Monitoring current ≤12mA
Alarm current ≤22mA
Overall power consumption <3W
Use conditions Temperature: -10°C~+50°C
Relative humidity ≤ 95%
Protective area The maximum protective area of the detector is 1400 m² (14×100=1400 m²) and the maximum width is 14m.
Optional Monitoring Distance AW-BK901-25 25meters with 1 reflector
AW-BK901-40 40meters with 1 reflector
AW-BK901-70 70meters with 4 reflector
AW-BK901-100 100meters with 4 reflectorS

Our company
Asenware, manufacturer of fire alarm and fire suppression system since 2005. Our headquarter is in London, UK, with factory Shenzhen, China
We keep our best service for our customers, and have a rich experienced engineer team to design and install for overseas projects.

Product range:

1. Addressable fire alarm system(FP100 series,2189,2100 series)
2. Conventional fire alarm system(2166 series)
3. FM200 gas fire suppression system

Conventional Beam Smoke Detector Optical Beam Smoke Sensor Lpcb Approved



Contact us


Shenzhen Asenware Test And Control Technology Co.,Ltd.

Address: Room 701,Bd8,Dongfangming industry zone,Dabao Rd, Baoan, Shenzhen,China-518101
 
 
 
Website:asenware.en.made-in-china.com 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours